|
Product Details:
Payment & Shipping Terms:
|
Product: | VHF Mobile Car Car Am Fm Radio Dab Antenna Receiver SMB DAB Antenna | Connector: | Customized |
---|---|---|---|
VSWR: | <2 | Humidity: | <75% |
Gain(dBi): | 28 | Frequency Band: | 1575.42±2&1561±2 |
High Light: | am fm car radio antenna,automotive roof mount antenna |
VHF Mobile Car car am fm radio dab antenna receiver SMB DAB antenna
PRODUCT INFORMATION
Mechanical Specification | |
Name | GPS antenna |
Part Number | SAA31091A |
Dimension(mm) | 37×42.5×17 |
Connect Type | SMA-J |
Cable Length(mm) | RG174-1.0m |
Color | Black |
Work Temp.(℃) | -40℃~+85℃ |
Humidity | <75% |
Antenna | LNA | ||
Frequency Range(MHz) | 1575.42±2&1561±2 | Voltage | 3.0-5.0V |
-10dB Bandwidth | ≥10MHz | Current | 25mA |
Return Loss | ≤‐20dB | Output VSWR | 1.5max |
Gain(dBi) | -2 | Gain(DC3V) | 28 |
Polarization | RHCP | Noise Figure(DC3V) | 1.0dB max |
Axial Ratio | ≤3 | Input Impedance(Ω) | 50 |
Mechanical Specification | |
Name | Ceramic Dielectric Antenna |
Part Number | SAS60081A |
Dimension(mm) | 18×18×4 |
Connect Type | PIN |
Work Temp.(℃) | -40℃~+85℃ |
Humidity | <75% |
Electrical Specification | |
Frequency Range(MHz) | 1575.42±1.023 |
-10dB Bandwidth | ≥10MHz |
Return Loss | ≤‐20dB |
Gain(dBi) | 3 |
Polarization | RHCP |
Axial Ratio | ≤4 |
Input Impedance(Ω) | 50 |
Frequency Temperature Coefficient | 20ppm/deg.℃ |
Mechanical Specification | |
Name | Ceramic Dielectric Antenna |
Part Number | SAA31280A |
Dimension(mm) | 48×48×12.4 |
Connect Type | SMA |
Work Temp.(℃) | -40℃~+85℃ |
Humidity | <75% |
Electrical Specification | |
Frequency Range(MHz) | GPS/L1/L5 |
-10dB Bandwidth | ≥10MHz |
Return Loss | ≤‐20dB |
Gain(dBi) | 30 |
Polarization | RHCP |
Axial Ratio | ≤4 |
Input Impedance(Ω) | 50 |
Frequency Temperature Coefficient | 20ppm/deg.℃ |
Mechanical Specification | |
Name | Ceramic Dielectric Antenna |
Part Number | SAA31280B |
Dimension(mm) | 58×60×28 |
Connect Type | SMA |
Work Temp.(℃) | -40℃~+85℃ |
Humidity | <75% |
Electrical Specification | |
Frequency Range(MHz) | GPS/L1/L5 |
-10dB Bandwidth | ≥10MHz |
Return Loss | ≤‐20dB |
Gain(dBi) | 30 |
Polarization | RHCP |
Axial Ratio | ≤4 |
Input Impedance(Ω) | 50 |
Frequency Temperature Coefficient | 20ppm/deg.℃ |
Mechanical Specification | |
Name | Car FM antenna |
Part Number | |
Dimension(mm) | Φ31×51 |
Connect Type | SMA-J |
Cable Length(mm) | |
Color | Black |
Work Temp.(℃) | -40℃~+85℃ |
Humidity | <75% |
Frq(MHz) | AR(dB) | Efficiency(%) |
GAIN (0°) |
GAIN (±30°) |
GAIN (±60°) |
1980 | 0.9 | 59.76 | 5.63 | 4.80 | 1.22 |
1990 | 0.8 | 68.31 | 6.26 | 5.43 | 1.82 |
2000 | 0.7 | 63.20 | 5.89 | 5.09 | 1.43 |
2010 | 0.46 | 59.96 | 5.55 | 4.82 | 1.20 |
2170 | 0.01 | 58.51 | 5.68 | 4.98 | 1.47 |
2180 | 0.33 | 56.03 | 5.49 | 4.81 | 1.26 |
2190 | 0.75 | 57.43 | 5.72 | 4.96 | 1.34 |
2200 | 0.92 | 57.28 | 5.84 | 5.00 | 1.23 |
RELIABILITY TEST REPORT
No. | Item | Test Condition | Remark |
1 | Humidity | The device shall be placed in 90%~95% relative humidity and at 60℃±3℃ for 48h, then place at 25℃±5℃ and less than 65% relative humidity for 2h |
It shall fulfill the specification |
2 | High Temperature | The device shall be placed at 85℃ for 48h, then place at 25℃±5℃ and less than 65% relative humidity for 2h |
It shall fulfill the specification |
3 | Low Temperature | The device shall be placed at -40℃ for 48h, then place at 25℃±5℃ and less than 65% relative humidity for 2h |
It shall fulfill the specification |
4 | Temperature Cycle |
The device shall be placed at -40℃ for 30 min then at 85℃ for 30 min. Cycling shall be repeated 5 times. At the room temperature for 1h |
It shall fulfill the specification |
5 | Salt Spray Test | The device shall be placed in salt spray box (5% NaCl) at 25℃±5℃ for 24h. |
It shall fulfill the specification |
6 | Vibration Test | The device shall be subjected to vibration for 2h each in x,y and z axis with the amplitude of 1.5mm, the frequency shall be varied uniformly between the limits of 10Hz~55Hz. |
It shall fulfill the specification |
7 | IP5X Test | The device shall be placed in the dust test machine, dust blowing mode, at 35℃ for 4 hours, then turn on dust floating mode, at 45℃ for 4 hours. |
It shall fulfill the specification |
8 | IPX6 Test | The device shall be placed in spray water in all direction. Nozzle inner diameter 12.5mm, water flow 100±5L/min, for 3min |
It shall fulfill the specification |
PRODUCT PICTURE
PRODUCT CATEGORY
Our Main prouct is Wifi antenna, GPS antenna, GNSS antenna, 433mhz antenna, PCB antenna, FPC antenna, 4G lte antenna and so on.
1. Payment available: 100% T/T, Western Union, Paypal and so on.
2. Country of origion: Shanghai, China
3. Delivery terms: By sea or air or express( EMS, DHL, UPS, FedEx, TNT and so on)
Contact Person: Mr. George
Tel: 86-13651722373
Fax: 86-021-56165098