 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Product: | RF Cable Assemblies For N-F SMA RG142 L=3M Antenna Cable Assembly | Connector: | SMA, Ipex Connector/ Customized |
|---|---|---|---|
| Color: | Customized | Cable Type: | Customized |
| High Light: | radio frequency cable,rf aerial cable |
||
RF Cable Assemblies for N-F SMA RG142 L=3M Antenna Cable Assembly
PRODUCT INFORMATION
| Name | Spec. |
| IPEX OD1.13/OD1.37OD1.78 cable | Ipex connector |
| Cable | N-K to SMA-J |
| SMA-J to RG316 Cable | Customized |
| SMA-K to RG178Cable | Customized |
| SMA-K to OD1.13/OD1.37 Cable to IPEX | Customized |
| SMA-K to OD1.13/OD1.37 Cable to IPEX | Customized |
| SMA-K to OD1.13/OD1.37 Cable to IPEX | Customized |
| SMA-K to OD1.13/OD1.37 Cable to IPEX | Customized |
RELIABILITY TEST REPORT
| No. | Item | Test Condition | Remark |
| 1 | Humidity | The device shall be placed in 90%~95% relative humidity and at 60℃±3℃ for 48h, then place at 25℃±5℃ and less than 65% relative humidity for 2h |
It shall fulfill the specification |
| 2 | High Temperature | The device shall be placed at 85℃ for 48h, then place at 25℃±5℃ and less than 65% relative humidity for 2h |
It shall fulfill the specification |
| 3 | Low Temperature | The device shall be placed at -40℃ for 48h, then place at 25℃±5℃ and less than 65% relative humidity for 2h |
It shall fulfill the specification |
| 4 | Temperature Cycle |
The device shall be placed at -40℃ for 30 min then at 85℃ for 30 min. Cycling shall be repeated 5 times. At the room temperature for 1h |
It shall fulfill the specification |
| 5 | Salt Spray Test | The device shall be placed in salt spray box (5% NaCl) at 25℃±5℃ for 24h. |
It shall fulfill the specification |
| 6 | Vibration Test | The device shall be subjected to vibration for 2h each in x,y and z axis with the amplitude of 1.5mm, the frequency shall be varied uniformly between the limits of 10Hz~55Hz. |
It shall fulfill the specification |
| 7 | IP5X Test | The device shall be placed in the dust test machine, dust blowing mode, at 35℃ for 4 hours, then turn on dust floating mode, at 45℃ for 4 hours. |
It shall fulfill the specification |
| 8 | IPX6 Test | The device shall be placed in spray water in all direction. Nozzle inner diameter 12.5mm, water flow 100±5L/min, for 3min |
It shall fulfill the specification |
PRODUCT PICTURE
PRODUCT CATEGORY
Our Main prouct is Wifi antenna, GPS antenna, GNSS antenna, 433mhz antenna, PCB antenna, FPC antenna, 4G lte antenna and so on.
1. Payment available: 100% T/T, Western Union, Paypal and so on.
2. Country of origion: Shanghai, China
3. Delivery terms: By sea or air or express( EMS, DHL, UPS, FedEx, TNT and so on)
Contact Person: Mr. George
Tel: 86-13651722373
Fax: 86-021-56165098
