 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Name: | 2.4g Wifi Antenna | S.W.R: | ≤1.5 |
|---|---|---|---|
| Gain: | 3dBi | Material: | Plastic |
| Connector Type: | SMA Male/ IPEX 1.13cable (Customizable) | Impedance: | 50 Ohm |
| Part Number: | SAA30993A | Frequency Range: | 2.4ghz-2.5ghz |
| Quality: | Best | Port: | Shanghai, Shenzhen |
| High Light: | dual band pcb antenna,pcb wifi antenna |
||
All the product had passed the ROHS environmental standards.
Specification:
|
Product Name |
2.4GHz wifi receiver antenna/ 5GHz wifi receiver antenna/ 2.4G 5G dual band wifi receiver antenna |
|
Frequency Range |
2.4~2.5GHz/ 4.9~5.9GHz/ 2.4~2.5GHz 4.9~5.9GHz dual band |
|
S.W.R |
<1.5 |
|
Gain |
3dBi~5dBi |
|
Connector |
SMA M/F, RP SMA, UFL, IPEX |
|
Impedance |
50Ohm |
|
Environmental Standard |
ROHS, REACH |
Reliability test:
|
Project |
Test condition |
Result |
|
Storage environment |
Temperature, humidity, air pressure test are as follows: 1. Temperature: -30℃~+80℃ 3. Pressure: 86kpa-106kpa |
Normal electrical and mechanical properties |
|
High and low temperature test |
The 5 cycle is between 70℃ and 40℃. Then check the appearance quality |
Meet the mechanical and electrical properties |
|
Resistance to constant damp heat test |
Humidity 95+3%, temperature: 40 degrees celsius. Continuous 2H |
Meet the mechanical and electrical properties |
|
Vibration test |
Vibration frequency 10-55HZ, displacement: 0.35MM, acceleration: 50.0M/S, Frequency sweep frequency: 30 times |
Normal electrical and mechanical properties |
|
Drop test |
1m height drop |
Normal electrical and mechanical properties |
|
Drawing force test |
Push pull tester to test the strength of the instrument:≥10N |
Normal electrical and mechanical properties |
|
Voltage resistance |
1. Insulation spark voltage 1.5KV 2. Sheath spark voltage 1.5KV 3. Insulation resistance to sheath voltage 0.5KV |
Normal electrical and mechanical properties |
Contact Person: Mr. George
Tel: 86-13651722373
Fax: 86-021-56165098
